Having accumulated precious experience in cooperating with foreign customers, a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….
- Applicable Industries:
Black, Zinc plated, etc.
Grinding or not
longest 4 meters without welding
- Heat treatment:
Reply in 12 hours at any time
Oil+PE bag+ Wooden case
Worm Gear Reducers also known as worm gearbox or worm speed reducers. Worm gear reducers are used for speed reduction and increasing the torque for electric motor drives. You can choose to mount your NEMA motor to the reducer by using the NEMA C face flange or use a coupling. If you need a coupling for the output or input shaft see our coupling section for selecting a coupling. We offer four assemblies left hand and right hand and double output shaft and shaft input and shaft output. Interchangeable with most worm gear manufactures. See data sheet in product overview for diamensions. If you don’t see your type, please Contact Us.
- Teeth Type:
Spur teeth or Helical teeth
Nylon, POM etc.
- Supply Ability:
- 5000 Piece/Pieces per Month
Packaging & Delivery
- Packaging Details
- to pretect the gear racks”>Antirust oil + PE bag + Wooden case
to pretect the gear racks
- Ningbo, Shanghai or as request
Quantity(Bags) 1 – 200 201 – 500 501 – 2000 >2000 Est. Time(days) 20 30 45 To be negotiated
High precision c45 galvanized surface round gear rack
Our spur and helical gear racks are welcomed by many customers for its stable high quality and competitive price.
The producing character of JH gear racks.
1. Gear rack length: the longest is 4000mm without joint. It can be jointed to any length.
2. Material: steel C45, stainless steel, high strength steel, copper, aluminium, nylon, plastic, POM etc;
3. Module: 0.3-8 (pitch from 0.942-25.12mm, DP 3.175-85);
4. Surface: zinc (galvanized), black, chromium plating, nickel plating, quenching and tempering etc.
5. Quality: stable and high: accumulated tolerance 0.1mm per 1000mm for normal quality;
Accumulated tolerance 0.02mm per 1000mm for 4 sides ground.
Prices for above quality are very competitive for us.
6. Heat treatment: teeth can be hardened to HRC 43-50.
The quality character of JH gear racks:
1. Stable transmission and low noise;
2. EffeMaintenance Maintenance on these units is straight forward and like all moving parts these need their fair share of grease and should be greased regularly as these components work very hard and are subject to all that nature can provide for wear and tear. Good grease is essential here; put grease in until you see the old grease oozing out. Go easy on the “U” joints so you don’t blow the seals. Short bursts of a low pressured air grease gun or even better a hand pump gun will do the job and should be done based on hourly use. At least once a season the primary and secondary shafts should be separated. All debris and any rust should be cleaned off. Examine thoroughly for any signs of stress and apply a liberal amount of grease. In addition to this, both the PTO yoke holes need grease inside of them at least once a year along with the yoke lock pin.ctively avoid normal tolerance based on high precision;
3. The surfaces can be ground to grade 7 quality, and teeth can be ground to grade 6 quality;
4. The mounting holes can be made as request;
5. The price is competitive even the quality is high.
CNC gear hobbing machine;
CNC gear shaper;
CNC gear grinding machine;
CNC turning machine;
CNC milling machine.
Y58200 CNC large gear rack shaper,
Y58125A gear rack shaper,
England gear rack shaper
and Russia gear rack shaper,
Steel: C45, Q235, 40Cr, 20CrMnTi, etc.
Stainless steel: 301, 201, 304, 316 etc.
Brass: H59 H68 H80 H90 etc.
Aluminium: 6082, 6061, A380 etc.
Aluminium alloy: 6061, 5083, 7050, etc.
More: PA6, PA66, POM, ABS etc.
Spur teeth gear rack;
Helical teeth gear rack;
Round gear rack;
Tube gear rack;
Curved gear rack.
|Surface||Polishing; Plating; Galvanized; Black; chromium plating, nickel plating; painting etc.|
1. Delivery time: 15-25 days for small order;
30-45 days for big order. (Never delayed till now)
Can be discussed for more urgent order.
2. Response time: usually in 1 hour and in 12 hours even in our holidays.
3. Process feedback: Photos or vedios will be sent for 2-3 times to inform you the producing situation.
4. Test report: The test report can be offered as request.
5. Payment terms: T/T, L/C, D/P, D/A, O/A, M/T, D/D etc.
6. Trade terms: FOB, CFR, CIF, FCA, CPT, CIP, DDU, DDP etc.
A: Yes. Since 2004 only focus on producing high quality gears and racks.
Q: Response time?
A: Reply very soon, and reply in 12 hours at any time.
Our technicians are always together with salesmen, so your any questions can be replied very soon.
A: Drawings are more appriated for quotation. Or, please inform us your request, we will make drawings for your check.
Q: Delivery time?
A: 15-25 days for small order (<200 pcs), 30-45 days for large order.
Orders never be delayed, the products will be sent on time as agreement.
A: Middle and high quality is more competitive.
Q: Payment terms?
A: T/T for less than US$20,000 order, and L/C, D/P, D/A, O/A, M/T, D/D etc. for large orders.
Q: Trade terms?
A: FOB, CFR, CIF, FCA, CPT, CIP, DDU, DDP etc. are all accepted.
Hot related products