Cast Chains
Cast chains are produced using cast links and high temperature treated metal pins. They are designed with slightly bigger clearances that permit the material to easily work its way out of the chain joint. Cast chains are found in a number of applications such as sewage treatment, drinking water filtration, fertilizer handling, glucose processing and waste wood conveying. They are plentiful from stock with standard attachments.
Our Cast Chains
Combination rooftop transfer chain is used chiefly in several strands on transfer conveyors handling lumber, boxes, packages, barrels, bars, etc. Just the bevel tops of the links project about the guides, permitting loading and unloading to be done transversely.
Rooftop transfer chain is used chiefly in several stands upon transfer conveyors handling lumber, boxes, packages, barrels, bars, etc. Only the bevel tops of the links task about the guides, permitting loading and unloading to be achieved transversely.
900 class intermediate carrier chains were designed primarily for sugar mill program. Multiple strands may have overlapping, beaded slats mounted 
on them to form a continuous apron for an intermediate carrier conveyor.
Mixture type drag chains are designed with sections heavier than comparable sizes of H type drag chains. The double offset wear shoes or boots on the cast link provide wear areas for both holding and return runs, therefore increasing chain life.
700 class pintle chains are of one-piece cast offset hyperlink construction joined together by steel clipped head pins. The pins are safely locked against submiting the sidebars by generous mind stops cast on the links. The head stops are positioned to supply maximum locking effect when the chain can be under load. This confines the wear to the section of the pin in the barrel of the hyperlink, where it really is distributed over the maximum area. This insures the best sturdiness of the chain.
H class mill chains are of one-piece cast offset link construction joined together by steel clipped heads. They are used mainly for drag conveyor service in the lumber, pulp and paper industries. Also, they are desirable for transfer and conveying reasons.
400 class pintle chains are of one-piece cast offset link construction joined together by steel pins. The pins are safely locked against turning in the sidebars by generous mind stops that are cast on the links. The head stops are positioned to provide maximum locking effect when the chain is definitely under load. This confines the put on to the part of the pin within the barrel of the hyperlink, where it is distributed over the maximum area. This insures the very best sturdiness of the chain.
Cast Chain
Cast Chain
We can offer an array of cast chain products for use in sewage water treatment equipment, in addition to conveying applications in sugar making and steelmaking industries. Our chains can be cast using different material elements, based on specific usage requirements and desired technical specifications. All cast chains come with simple structure and couple of pores, boosting very high tensile strength.
