We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
gt350 driveshaft john deere snowblower pto shaft EPG push shaft citra is pto shaft for john deere hx15 specialised disassemble pto shaft in 1 sq. pto shaft design and style, pto shaft servicing producer pto yoke dimensions chart and bmw e46 m3 driveshaft product sales 2000 jeep wrangler entrance drive shaft of agricultural equipment and farm implements, which has an impartial import and export rights. It is our aim to offer a extensive range of quality products at cost-effective rates, offer the very best provider for customers pleased and contribute to our continued enhancement. This hefty-responsibility BW-1000XL brush chipper with its all-stell motor enclosure is developed to maintain up for the lengthy haul. Able to Chip by means of materials up to 12” (30.5cm), the need to rim materials is decreased , making the BW-1000XL an best equipment for line-clearing contractors, rental yards and municipalities.
Enhanced with the modern day operator in mind, the BW-1000XL is available with a Tier 3 Cummins QSF 2.8L 74HP (55kW), when transpoting the device, assume sleek towing many thanks to the rubber -torsion suspension.
It is straightforward to see w EPT the BW-1000XL is the brush chipper that operators turn to.
1: Operator safety. Crisis end buttom is made on facet.
two: A clutchless PTO program makes it possible for the cutter to be engaged without having utilizing a classic slip clutch or loafer pulley and with no s EPT the engine. The system is easy to maintain – once underneath the protect, belt adjustments are effortlessly
achieved with out the use of tools.
3: The Feed technique assists boost operator productiveness even though lowering pressure on important motor parts. The feed-sensing manage system monitors motor rpm and routinely stops and reverses the feed roller when feeding more substantial, hardwood content.
four: A big rectangular twelve” x seventeen” (thirty.5 cm x forty three.2 cm) feed opening helps enhance productiveness by reducing the require to trim materials before feeding it into the chipper.
5: The 2-year/2000-hour prolonged limited guarantee on drum housing, cutter drum, shaft and ring-fetter hubs gives you peace of mind.
Technical information for BW-1000XL:
| General Dimensions and Weights | |
| Length – Feed Desk Up, Tongue In | 4500 mm |
| Duration – Desk Down, Tongue Extended | 5400 mm |
| Width | 1750 mm |
| Peak | 2560 mm |
| Fat – Engine | 2750 kg |
| Audio Electricity | 119 (db) |
| Engine | |
| Make and Model | Cummins QSF 2.8L Tier 3 |
| Quantity of Cylinders | 4 |
| Gross Horsepower (Maximum) | 74HP (55 Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Gas Tank Capability | sixty five L |
| Max Fuel Consumption | 233g /Kw.h |
| Gas Sort | Diesel |
| Air Cleaner | two-stage dry with security aspect |
| Oil Filter | Spin-on |
| Advisable Oil | 15W40 |
| Oil Volume with Filter | 8.4 L |
| Amazing EPT Capacity (Motor and Radiator) | 13 L |
| Cooling Medium | Liquid |
| Supporter | 419mm |
| Clutch Kind | Clutchless PTO |
| Clutch Drive Engagement | Belt tensioner |
| Feed System | |
| Feed Roller Orientation | Horizontal |
| Quantity of Feed Rollers | 1 |
| Feed Roller Clamp Load | 158.8 kg |
| Feed Roller Minimum Distance to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Variety of Knives | two |
| Excess weight of Feed Roller | 181.4 kg |
| Amount of Feed Roller Motors | one |
| Motor Displacement | 28.3 |
| Motor Producer | White |
| Feed Pace | one zero five ft/min |
| Infeed Table Width | 1321mm |
| Infeed Hopper Top | 1330mm H x 750mm W |
| Infeed Throat Ability | 630mm H x 432mm W |
| Pinch Level – Length to End of Feed Table | 1689mm |
| Distance from Feed Desk to Floor | 820mm |
| Safety System | |
| Feeding cease technique | Crisis cease buttom on Side of Infeed Hopper |
| Reset Approach | Hold-to-operate Crisis end buttom button |
| Three Place Feed Handle Bar | StHangZhourd |
| Positions | three: forward, Quit and reverse |
| Drum/Disc Chopping Program | |
| Material Potential | 305mm |
| Diameter | 50mm |
| Pace | 2240 rpm |
| Basic safety Lock – Variety of Positions | two |
| Quantity of Knives | 2 parts |
| Variety of Bedknife | four |
| Cutter Generate Factors | |
| Quantity of Bearings | 2 |
| Bore | 61mm |
| Sort | Spherical rollers |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 14242.8 kg |
| Static Capacity | 24267.2 kg |
| Belt Idler/Tensioner | Yes |
| Belt Sort | 5V |
| Discharge System | |
| Chute Height | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Sort | Chain-drivve handbook crank with pin lock |
| Rotational Lock | Of course |
| Hydraulic Program | |
| Tank potential | 26.5 L |
| Suggested Oil Kind | #68 Antiwear hydraulic oil |
| Program Sort | Open middle |
| Filtration Technique | 10 micron return one hundred micron suction |
| Pump Flow at Greatest RPM | 11.4 L/min |
| System aid force | 17.24 Mpa |
| Stream Handle | Sure-Guide |
| Directional Management | Of course-Manual |
| Oil Cooler | No |
| Electrical Technique | |
| Method Voltage | 12 volt |
| Battery | ninety/660 (Ah/A) Germany Walter Manufacturer |
| StHangZhourd Gauges | Gasoline, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Display | Tach, gasoline, voltage, h2o temp, oil force,oil temp, loading, engine erro information |
| Shutdown System | Vehicle Substantial temp, reduced pressure security |
| Chassis | |
| Tongue Extension | Extendable 610mm New E-mail hzpt@hzpt.com 305mm increments |
| Hitch Sort | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Type – Choice One | Rubber torsional |
| Brake Type | StHangZhourd Electric powered or optional hydraulic |
| Trailer Light Type | LED |
| General Proportions and Weights | |
| Duration – Feed Desk Up, Tongue In | 4500 mm |
| Duration – Table Down, Tongue Extended | 5400 mm |
| Width | 1750 mm |
| Height | 2560 mm |
| Fat – Motor | 2750 kg |
| Sound Electricity | 119 (db) |
| Engine | |
| Make and Product | Cummins QSF 2.8L Tier three |
| Quantity of Cylinders | 4 |
| Gross Horsepower (Highest) | 74HP (fifty five Kw) /2400rpm |
| Torque (Max) | 371 Nm |
| Fuel Tank Capacity | sixty five L |
| Max Fuel Usage | 233g /Kw.h |
| Gas Sort | Diesel |
| Air Cleaner | two-phase dry with safety element |
| Oil Filter | Spin-on |
| Recommended Oil | 15W40 |
| Oil Quantity with Filter | eight.4 L |
| Amazing EPT Ability (Motor and Radiator) | 13 L |
| Cooling Medium | Liquid |
| Fan | 419mm |
| Clutch Sort | Clutchless PTO |
| Clutch Push Engagement | Belt tensioner |
| Feed Technique | |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | one |
| Feed Roller Clamp Load | 158.8 kg |
| Feed Roller Least Length to Drum | 25mm |
| Feed Roller Dimension | 508mm x 432mm |
| Variety of Knives | 2 |
| Fat of Feed Roller | 181.4 kg |
| Number of Feed Roller Motors | 1 |
| Motor Displacement | 28.3 |
| Motor Manufacturer | White |
| Feed Velocity | one zero five ft/min |
| Infeed Desk Width | 1321mm |
| Infeed Hopper Top | 1330mm H x 750mm W |
| Infeed Throat Capability | 630mm H x 432mm W |
| Pinch Level – Length to End of Feed Desk | 1689mm |
| Length from Feed Table to Floor | 820mm |
| Safety Program | |
| Feeding end program | Unexpected emergency end buttom on Facet of Infeed Hopper |
| Reset Technique | Hold-to-run Unexpected emergency quit buttom button |
| 3 Placement Feed Control Bar | StHangZhourd |
| Positions | three: ahead, Cease and reverse |
| Drum/Disc Cutting System | |
| Materials Capability | 305mm |
| Diameter | 50mm |
| Pace | 2240 rpm |
| Security Lock – Number of Positions | two |
| Number of Knives | two parts |
| Variety of Bedknife | 4 |
| Cutter Push Elements | |
| Quantity of Bearings | 2 |
| Bore | 61mm |
| Kind | Spherical rollers |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 14242.8 kg |
| Static Ability | 24267.2 kg |
| Belt Idler/Tensioner | Of course |
| Belt Kind | 5V |
| Discharge Method | |
| Chute Height | 2565mm |
| Chute Rotation Angle | 270 deg |
| Rotation Kind | Chain-drivve guide crank with pin lock |
| Rotational Lock | Sure |
| Hydraulic Program | |
| Tank ability | 26.5 L |
| Recommended Oil Variety | #68 Antiwear hydraulic oil |
| Method Variety | Open centre |
| Filtration Approach | 10 micron return 100 micron suction |
| Pump Stream at Maximum RPM | eleven.4 L/min |
| Technique relief strain | 17.24 Mpa |
| Stream Control | Indeed-Handbook |
| Directional Handle | Of course-Manual |
| Oil Cooler | No |
| Electrical Technique | |
| System Voltage | 12 volt |
| Battery | 90/660 (Ah/A) Germany Walter Model |
| StHangZhourd Gauges | Gasoline, hour |
| Switches | Droop, rocker |
| Controller | BODE |
| Screen | Tach, fuel, voltage, h2o temp, oil strain,oil temp, loading, engine erro info |
| Shutdown Program | Auto High temp, minimal pressure security |
| Chassis | |
| Tongue Extension | Extendable 610mm New Email hzpt@hzpt.com 305mm increments |
| Hitch Variety | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Kind – Alternative 1 | Rubber torsional |
| Brake Type | StHangZhourd Electric or optional hydraulic |
| Trailer Light-weight Variety | LED |
If you are hunting for ideal wood chipper shredder, welcome to contact us!
