We More importantly, we make special parts according to supplied drawings/samples and warmly welcome OEM inquiries. – EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Economical and practical 95HP 4WD wheel farm tractor
Advantage of HH954 95HP 4WD Farm tractor
All modes are powered with the famousYTO/YUCHAIbrand Engine, Vertical Water Cooled 4- stroke and 4 cylinder.
High performance/ Low fuel consumption and vibration/ noise.
Double action clutch is installed for independent operation.
Full hydraulic steering systemwith smaller turning radius, being flexible and reliable.
Combinationhaving16 forward gears and8 backward gears for easy operation and higher efficiency.
The main gear shift adoptssynchronizershift to reduce impact to gear to the maximum and thus, effectively elongated
Gear service life, range shift adopted tooth shift. The proper m allison transmission pto engagement atching has guaranteed gear box’s best use and
Optimized cost performance ratio.
FIAT front axle from Italy is used with advanced structure and super performance.
Independent hydraulic fuel system with high reliability.
Strengthened chassishaving great extension capacity and high reliability.
Intensified pressured lifter optimal with higher lifting, better operation and high reliability.
The Basic Configuration:
YTO / Yuchai /LOVOL, 4 cylinder, turbocharging
Full hydraulic steering
F16+R8 Shuttle shift
PTO Speed 540/1000 rpm
Draft&positional consolidated adjustable
Category II rear mounted 3-point linkage
Front tyre: 11.2-24; Rear tyre: 16.9-34
Enclosed fan cabin
Heater or AC
Front and Rear Ballast
One or two group output valve
High pressure hydraulic hitch
With Roll Over Protection Structure System
The HP we can supply is 25-145HP, if you need any of them, please contact with us.
Technical parameter for this 95HP 4WD farm tractor
|Drive type||4×4 95hp tractor|
|Engine model||YTO / Yuchai /LOVOL, 4 cylinder, turbocharging|
|Capacity of fuel tank(L)||150|
|Rated speed (r/min)||2300|
|Engine power (kw/hp)||73.5/100|
|Lowest fuel consumption (g/kw@h)||≤242|
|Clutch||Dry,dual-stage type, independent|
|PTO Speed(rpm)||540/1000 or 760/1000|
|Gearshift||16F+8R shuttle gear|
|Hydraulic output valve||2-Way(optional)|
|Three point linkage|
|Category of 3-point link||Category II|
|Lifting capacity(at point of 610mm)KN 610mm||>17.6|
|Dimension LxWxH mm||4280x2085x2815|
|Track base(mm) front wheel||1610~1950 mm|
|Track base(mm) rear wheel||1620~2571 mm|
|The smallest clearance(mm)||380|
|Rear tyre||16.9-34/ 18.4-30 (optional)|
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.