Common Description
Equipped with the zero leak bidirectional checking sole-noid valves, this power unit is intended for that operation of two independent circuits. Which are respectively for the key and subordinate platforms of the double scissors lift. Two cut-off valves are utilised for lowering the machine manually in case of electrical power loss. If a lot more independent circuits are needed for the application please make contact with us for availability.
Remark: 1. Please check with our income engineer for the distinctive pump displacement, motor power or tank capability.
two. CSA or UL licensed motors can be found upon request.
Specific Notes
1. The AC motor is of S3 duty cycle, which could only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean the many hydraulic components concerned prior to installation of the electrical power unit.
three. Viscosity with the oil shoud be 15~46 cst,plus the oil really should be clean and free of charge of impurities,N46 hydraulic oil is advised.
4. The power unit need to be mounted vertically.
5. Check the oil degree from the tank immediately after the first running on the power unit.
six. Oil transforming is needed after the original one hundred operation hrs,afterwards once every single 3000 hrs.