1.A connecting link of an O-ring Chain for standard application is pre-coated with grease at the pins. Just before connection, verify the grease around the surfaces of pins, and should the amount of grease is modest, apply grease with bare hands. (If gloves are employed, the grease will be absorbed by the gloves.)
Illustration: When the connecting link (I) of an O-ring chain for common application is
shipped, O-rings are fitted at the roots with the pins. Should the O-rings come loose as a consequence of vibration all through transport, refit the O-rings in to the roots in the pins.
In this instance, you’ll want to return the grease collected in the roots on the pins for the central surfaces of your pins, extra at portion A than at portions B proven from the above illustration. (Portions A is worn as a result of sliding using the bushings.)
2.The chain is often most conveniently connected to the teeth of the sprocket. Engage the links at both ends with the chain with the sprocket teeth and fit connecting 
pins. In the event the sprocket can be moved, the chain can also be connected over the loosened side.
3. Connecting method
1.Verify that O-rings are attached on the roots of your pins.
two.When the volume of grease applied on the connecting pins is little, coat the pins with grease in the central portions.
3.Insert the connecting pins in to the bushings with the inner links at both ends.
4.Confirm the grease is utilized towards the whole face of the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and while pressing the connecting plate, set up the spring clip. Confirm irrespective of whether the head (the end with no split) of your spring clip is turned in the feeding path of your chain. (See the next illustration.)
6.You should definitely confirm the spring clip is securely fitted inside the clip grooves of your connecting pins.
This completes jointing on the connecting hyperlink. Note that grease on the surfaces of connecting pins and O-rings is usually removed during set up function. In this case, re-grease using the grease on the surface with the base chain or even the grease inside the polyethylene bag by which the connecting website link was contained.
